| |
January 2010
February 2010
March 2010
April and May 2010
June, July and August 2010
|
|
|

A collection of new itemns for the summer including hand made brass DB2 & DB2/4 Grills which can be either painted or chromed, all items available for imediate ordering and despatch.
 |
DB2 and DB2/4 MkI and MkII Grills. (Part No 59053)
Hand made from brass to the original drawing specification (held by ourselves). Some modifications have been made to improve strength and ridgidity. Grills can be painted or chrome finished and we recommend fitting to the car before doing either.
|
| |
|
 |
Wooden Handled Screwdriver and Cross Over Pliers.
Now available new screwdrivers, as close to the original as we can source that fit perfectly in our MkIII rubber moulding, along with original type cross over pliers.
(Part No's 53242 and 53241) |
| |
|
 |
DB2 and DB2/4 Rotor Arm.
New 'Red Type' Rotor Arms, improved and considerably more reliable than old ones.
(Part No 56120A) |
| |
|
 |
DB4, DB5 and DB6 Rotor Arm.
New 'Red Type' Rotor Arm, again as with the DB2 one this is an improved, without rivet version which massively improves there reliability.
(Part No 20-07-701A) |
| |
|
 |
DB4 Handbrake Caliper, Spring, Lock Plate and Bolt.
20-27-770 Bolt, Pad Carrier.
20-27-776 Tab Washer, Pad Carrier Bolt
20-27-777 Retractor Fork |
| |
|
 |
DB4 Solid Steering Rack Mountings and Poly Bush for the Upper and Lower Wishbone, fitted together will give a sharper steering response.
(Uprated anti-roll bar available on request)
(Part No 55-50-600 and 20-23-120P) |
| |
|
 |
Radio Housing and Chrome Speaker Grill for DB5 and DB6.
New manufacturered radio housings suitable for the DB5 and DB6, come as ready to trim, sprayed black gloss.
Chrome Speaker Grill available seperatley.
(Part No 48-91-001 and 48-91-001G) |
Back to top

A few new parts for April, all are ready for immediate despatch. See descriptions on items for further information and click on the image to enlarge it.
 |
DB2 Vantage and DB2/4 Air Filters.
These are newly manufactured Air Filters, made from spun steel with an increased air flow mesh, 52%, up from the original 30%. They come complete as seen with K&N filter and replica badge.
(Part No's 51985) |
| |
|
 |
Splined Locking Washer for DB2 & DB2/4 Gear Box.
The original larger one often cracks, we have re-engineered to eliminate the problem and makes them easier to remove and fit.
(Part No's 55956 & 55955) |
| |
|
 |
New Light Weight Modern Starter Motor.
Suitable for DB2 through to DBS.
(Part No 20-09-116A) |
| |
|
 |
Cooling Hose Kit for DB2 and DB2/4 cars.
Contains: 113434 - Hose Radiator/Thermostat, 113431 - Radiator Outlet, 113435 - Water Pipe to Water Pump, 50252 - Connection, 51730 - Hose Water 1/2" bore, 75400 - Elbow Hose, 57683- Hose Inlet and Outlet.
(Part No HOSE01) |
| |
|
 |
Lagonda Rapide Dynamo and Pulley.
Lucas C48 Special Equipment.
Can be adapted to fit DB4.
(Part No 22-09-111 and 22-09-112) |
| |
|
 |
Water Pump for DBA MkIII Engine.
Re-manufactured by ourselves using original housings and newly machined impeller's, pulley and internals.
(Part No 90339) |
| |
|
 |
Handbrake Warning Light Switch for DB5, DB6 and Lagonda Rapide.
(Part No 22-30-171) |
| |
|
 |
Front Exhaust Hanger.
(Part No 22-35-156)
To fit DB5, DB6 and Lagonda Rapide. |
Back to top

This months new parts are listed below and are ready for immediate despatch. See descriptions for further information and click on the small image to enlarge.
Back to top

Below are the new parts that we have had made this month and are ready for immediate despatch.
The bumpers are currently made to order but we will be stocking them in the near future.
 |
New tooling for DB2/4 MkI, II and III Bumpers!! Now available to order in Stainless Steel or Chrome.
We will chrome them for you or supply them un-chromed.
Please register your interest by email or using our enquiry form
|
| |
|
 |
Steel Stiffeners for the new bumpers that we make above, these are available for DB2/4 MkI, II and III cars. |
| |
|
 |
Front Bumper Fitting Kit (Part No 73375)
Comprises of the Distance Piece (73375), Bearing Plate (78920), Rubber Block (72292) and if required 180mm Coach Bolts.
All other nuts and bolts etc available as well.
|
| |
|
 |
Rear Bumper Fitting Kit (Part No 72293)
This kit comprises of the Rear Bracket (72293), Rubber Block (72292), Bolts (119230,
Spring Washer (119481 and Nuts (119402). Additionally if required Coach Bolt for the Rear Overrider. |
| |
|
 |
Stainless Steel Special Bumper Bolts for DB2/4 MkI and Mk II Bumpers (Part No 122022), fixes ends of the bumper to the stiffener.
Also available Spring Washer (119483), Plain Washer (119473) and Plain Nut (119404).
|
| |
|
 |
DB2/4 Shock Absorbers now available again! Have your own reconditioned or we can supply them on exchange.
|
| |
|
 |
4.2 ltr Top Engine Gasket Set.
Contains new composite head gasket, enlarged port manifold gaskets and our new card cam cover gaskets.
Otherwise contains all other parts required for top end overhaul (minus carburettor and inlet manifold gaskets).
|
| |
|
 |
Door Striker Plate for DB2 and DB2/4 MkI and MkII Cars.
These are a chromed casting and ready to fit.
|
Back to top

The following are new parts that we have had made and are now in stock and ready for immediate despatch:
 |
3.7 and 4.0ltr Cam Cover Gaskets (Part No 20-07-129A)
This alternative is to original specification using gasket card rather than the cork type included in the gasket set currently supplied by Aston Martin.
Suits DB4 to DBS
|
| |
|
 |
3.7 to 4.2ltr Composite Head Gasket (Part No AM4200S)
This gasket is designed and produced in the UK as a modern alternative to the standard copper one, utilising current composite materials and technology.
Fits DB4 to DBS Cars up to 102mm bore size |
| |
|
 |
Inner Headlamp Rims for DB2/4 MkII, MkIII and DB4 (Part No 90470)
These are manufactured by ourselves from brass, polished and then chrome plated, as original Lucas items are no longer available |
| |
|
 |
Link Shaft Inner Trailing Slotted Nut (Part No 55085)
Newly available, manufactured from original drawings to fit the Trailing Link Shaft (Part No 55084)
Fits all DB2 and DB2/4 models |
| |
|
 |
Gear Lever Retaining Plate Screw and Spring (Part No 56002 and 20-41-223)
Made by ourselves from the original drawings and fits all DB2 and DB2/4 models
|
| |
|
 |
Steering Idler Spindle (Part No 55076)
Newly manufactured and not previously available, these are often found to be bent. Fits all DB2 and DB2/4 models
|
| |
|
 |
Stainless Steel Exhaust Hanger Brackets (Part No 53440)
Primarily for the DB2/4 MkIII twin system but can be used on earlier cars, hand made and highly polished stainless steel.
|
| |
|
 |
Crankshaft Nut (Part No 90089)
DBA Type but can be used on earlier engine, doesn't have the starting handle dog
|
| |
|
 |
Hose for Blower to Demister on DB2 and DB2/4 cars, different lengths required as detailed below:
Part No 55270 for DB2
Part No 74577 for DB2/4
|
| |
|
 |
Original Style Chromed Washer Jets (Part No 20-37-167A)
Will suit most models DB2/4 through to DBS
|
| |
|
 |
Braided Electrical Cable, made using modern techniques but given the original finish, available in the following Current (A): 5.75A, 8.75A 17.5A, 27.5A and 35A
Available in single colour's, main colour with tracer and in some cases a herringbone pattern, enquire for full list of colour's
|
| |
|
 |
Exhaust Manifold Gasket (Part No 20-08-113A) for DB4 through to DBS Cars with enlarged exhaust ports
Internal Diameter of ports is 47mm |
|
|